Hose Shut-Off Valve Lever

prusaprinters

<p>This is a replacement lever for a hose shut-off valve. The little lever to actuate the valve seems to break off every season, so I printed this replacement to have to avoid buying a new valve. Improved over the factory design to have fillets to distribute stresses better and hopefully avoid breaking as often.</p> <p>I would print at 50%+ infill with a strong pattern like gyroid. No supports are required as long as you print "upside down" (with the top flat area on the print bed). PETG would probably be best, but I used PLA.</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Creality</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Ender 3 Pro</p></div> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div> <p><strong>Resolution:</strong></p> <p>0.2</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>50</p></div> <p><strong>Filament:</strong> Inland PLA Black</p> </p></p></p> Category: Outdoor & Garden