Hose hook / Garden hose

cults3d

Support for garden hoses, towels or other lightweight objects. It is recommended to print on ABS: *Extruder temperature: 240°C Bed temperature: 100°C The use of a printing support is necessary, it is also recommended to use the "fixation" function in CURA. When printing, set the bed temperature to 100 °C and the extruder temperature to 240°C and preheat the ABS, spray the bed with lacquer or similar and start printing. Approximate run time, for 20% fill and a resolution of 0.2: 4.5 hours The screw holes were designed for 6mm metric thread screws. You can Remix for your measurements through tinkercad or preferred printing software. In the case of using PLA the following parameters are recommended: *Extruder temperature: 195°C *Bed temperature: 60 °C *Filling / infill: 60% *Apply the function supports and fixation on CURA Holder for garden hoses, towels or other objects with light weight. It is recommended to print in ABS: Extruder temperature: 240 ° C Bed temperature: 100 ° C It is necessary to use printing support, it is also recommended to use the "fixation" function in CURA. When printing, set the bed temperature to 100 ° C and the extruder temperature to 240 ° C and preheat the ABS, spray the bed with lacquer or similar and start printing. Approximate execution time, for 20% fill and a resolution of 0.2: 4.5 hours The screw holes were designed for 6mm metric thread screws. You can Remix your measurements through tinkercad or preferred printing software. In the case of using PLA, the following parameters are recommended: Extruder temperature: 195 ° C Bed temperature: 60 ° C Fill / infill: 60% Apply the supports and fixation function in CURA