Horizontal Extrusion Mounted Tool Holder, Ender 3/5/Plus, CR-10S Pro, etc.

thingiverse

PARTS: * 1 each - 3D Print of This Model * 2 each - M3 x 10mm Long Bolts * 2 each - T20 x M3 T Nut (AKA: 20mm T Nut or 2020 T Nuts) This is a remix of Phio79's Tool Holder, an excellent design that is compact and quick to print. The original hook placement was moved to the front face to make this holder compatible with the entire Ender 2/3/5/5 Plus and CR-10/S/S Pro series, as well as any other printer using a standard 20mm T Slot Extrusion profile (2020, 2040, etc). The original design does not work with printers that have belt hardware on the side. This holder is now longer to accommodate more hooks for calipers, and some 6mm / M6 spare nozzle or other tool holes were added. Slots for Push-Fit Connector C-Clips, small files, or other thin tools are also included. The holes were opened up a bit to allow more room for the hex keys, screw driver, and scraper. In Cura, you can use Horizontal Hole Expansion to make them bigger or smaller if needed. Screw holes at the top have been added for T20 Nuts and 10mm long M3 bolts to bolt it down to the frame. The hooks should hold it in place, but a single nut and screw may not be enough; two are included just in case. Phio79's version is elegantly simple, while my variation might be too much for some users. This remix was created in TinkerCAD.