Hooks rack, wall mounted

prusaprinters

This is a hooks rack with three to six hooks. The width of the hook racks is respectively 165, 220, 275, 330 mm, the hook spacing is 55 mm and the length of the hooks is 35 mm.Installation The hooks rack is screwed to the wall, so it has a strong and secure fixing. Use a flat head screw that fits countersunk holes with a diameter of 3,5-4 mm and a length of 20-25 mm, but this may vary depending on the type of wall you have.Printing and print settingsThe six hook rack requires a large print bed. Print the hooks rack lying on the back for best results.  In the model files, the parts are oriented in the best direction for printing. Use e.g. PLA for printing with a layer height of 0.2mm or less and a nozzle width of 0.4mm or less. A wall thickness of at least 4 lines and an infill of 35% or 100% if you prefer a solid hooks rack. A support structure is not required. Feedback is always good, if you want to encourage me or other designers to make more models, hit like and/or post your makes. If something is not good or if something is missing and can be improved, leave a comment.