Honkai Impact 3rd - Whisper of the Past: Sonnet

cults3d

This model is cut into 15 pieces to fit in printer with platform size of 200mm x 200mm x 200mm. It is not an easy model to print but not as hard either. To get the parts you want to print, you can refer to the picture of parts labelled to their file names in the preview section. Tons of support is needed to print these parts. Tunnels with 5mm and 10mm diameter is punch on the parts seam. If you are not confident in removing the support from the tunnels, you can use those as a guide to drill your own hole. Iron rod can be install on the tunnel to enhance the connecting face and use for alignment purpose. The model is cut in a way to deduce the amount of support contact to the surface of the prop. You can refer to the pictures in the preview section for the suggested orientation on the printing bed. An uncut version also included just in case you have your own ideas to cut it. For scaling, please use the same scale factor for all the parts. Cheers and Happy Printing!