Honkai Impact 3rd - Purana Phantasma: Nighteye

cults3d

This model is cut into 16 pieces to fit in Ender 3 with platform size of 200mm x 200mm x 200mm. All the piece come with flat face that can lay on the printing bed easily. However, you can print in upward position to reduce the amount of "staircase" artifacts on the surface. But this will result in plenty of support needed and longer printing time. There is a picture with all the pieces labelled to their file name in the preview section where you can refer to in getting the parts you want to print. I will suggest to print in order as it is quite complicated to assemble them. I also included an uncut version just in case you want to cut it yourself. There are tunnels of 5mm and 10mm in diameter punch on the model. You can use it for alignment purpose or bone installation purpose. Please be extra careful when removing support from the tunnel especially those located nearer to the surface. If you are not good in removing support, you can use those tunnel as guide for you to drill your own tunnel. Once printed, glue both pieces a and b together using superglue together to form a part. Repeat the same for the other pairs and join all the parts together after that. I also include 2 file with name "peg" and "peg4.5". They are cylinders with diameter 9.5mm and 4.5mm respectively. If you can't find anything to use for alignment on the tunnel, you can print these files. You will need to print two set of all the pieces in order to complete the set as shown in the cover picture. Please use the same scale factor for all the pieces. Cheers and Happy Printing!