Honkai Impact 3rd - MAG-Typhoon

cults3d

This model is cut into 16 pieces to fit in my Ender 3 with platform size of 200mm x 200mm x 200mm. All the pieces come with flat face that can lay on the printing bed easily. You can refer to the picture with pieces labelled to their file name in the preview section to get the pieces you want to print. I do include a uncut version as well just in case you want to cut it yourself. You can print in upward position if you want to reduce the amount of "staircase" artifacts on the surface. This will result in longer printing time and plenty of support needed. To retain the details, I will suggest a smaller layer height. Once printed pieces a and b, glue them together to form a part. Repeat the same for the other pairs then join them together. There is tunnels punch on the model which you can use for alignment purpose or bone installation. All the tunnels come with diameter of 10mm. Just in case you can't find anything that can help you with it, you can print the "peg" file included. It is a cylinder with 9.5mm which can be use as a tool for you to align the pieces. The default length of the model is around 1100mm. You can scale to the size you need in any slicer software of your choice. But do remember to scale all the pieces using the same scale factor. Cheers and Happy Printing.