Honeycomb monitor stand (fits 235mm wide board)

prusaprinters

I was inspired by other “honeycomb monitor stand” designs available on Printables and modelled my own in Fusion 360. But these other designs don't work for me since I can't source locally (Australia) the correct size timber board. This design fits a 235mm wide x 19mm thick timber board.Here is the exact one I used: 235 x 19mm 1.2m DAR Pine Premium - Bunnings AustraliaYou can cut the board to any length you prefer. In my case I used 66cm, which appears to be super sturdy. No need to tweak slicer settings, the honeycomb pattern is baked into the model. FilesHoneycomb Monitor Stand v13.stl: Standard version, the stand is 30mm thick.Honeycomb Monitor Stand Thin v2.stl: Thinner version, the stand is 20mm thick. (40% quicker print time)15mm hexagonal sanding tool v2.stl: If you are printing with a material that is prone to stringing (eg. in my case wood filament), then you can print this and wrap sanding paper around it to help remove stringing.  Print SettingsLayer Height: 0.20 - 0.32mmNozzle size: 0.40mmInfill: 15%Material: PLA (I recommend using a strong PLA filament, in my case Polymaker Polywood was sufficient).Print orientation: Recommended to print with the honeycomb side on the printed.