Honeycomb headphone stand

prusaprinters

<p>I really like the original design and made a couple of them already.</p> <p>But I discovered that I wanted to change and improve a couple of things. My redesign includes the following changes:</p> <p>The hexagon are now over lapping which means that internal and external walls have the same thickness. I think that looks more sleek.</p> <p>I remove 2 hexagons in the base, to make it look "lighter"</p> <p>The stand and the base are joining differently. The base has a recess for the stand to be glued in. Unlike the original the fit is tight.</p> <p>The size is same as the original and just fits on the bed of PRUSA. Its big enough for large headsets.</p> <p>========<br/> picture of the print will follow soon</p> <h3> Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Prusa</p> <p><p class="detail-setting printer"><strong>Printer: </strong> <div><p>i3 MK3</p></div><strong>Rafts:</strong></p> <p>No</p> <p><p class="detail-setting supports"><strong>Supports: </strong> <div><p>Yes</p></div><strong>Resolution:</strong></p> <p>0.15</p> <p><p class="detail-setting infill"><strong>Infill: </strong> <div><p>20</p></div></p> <p><strong>Notes:</strong></p> <p>Supports are recommend for the base part, to support the recess.</p> <p>I used a wide brim for all parts, otherwise the bed adhesion was not good enough.</p> <h3> Post-Printing</h3> <p>The three parts need to be glued together. I used superglue and light clamping pressure.</p> </p></p></p> Category: Audio