Honey Bucket Rack

prusaprinters

<p>Use this bucket rack to drain from one bucket into another. Often used for draining honey.</p> <p>The TinkerCad files are here:<br/> <a href="https://www.tinkercad.com/things/6xcHbrelcE2">https://www.tinkercad.com/things/6xcHbrelcE2</a></p> <p>Thanks to BalinTech for the 5 gallon bucket STL. I used that to tweak my design and test the parts in 3D for fit.</p> <p><a href="https://www.thingiverse.com/thing:1938002">https://www.thingiverse.com/thing:1938002</a></p> <p>Updated Dec 20th 2018: Added left and right frame brackets for buckets with narrow rims at the top of the bucket so that the fit is tighter against the bucket. Use 'Frame Left - thin rim.stl' and 'Frame Right - thin rim.stl' if your bucket's rim edge is thinner than show in my pictures (about 2x bucket wall thickness). My original brackets were sized for a bucket rim that is 5-6x bucket wall thickness.</p> <h3>Print instructions</h3><h3><strong>Print Settings</strong></h3> <p><strong>Rafts:</strong> No<br/> <strong>Supports:</strong> No<br/> <strong>Resolution:</strong> .2mm<br/> <strong>Infill:</strong> 45%<br/> <strong>Filament:</strong> Any PLA or PETG Any</p>