Honda Forza 300 Box Clip

thingiverse

The Clip for the lockable Box on my Honda Forza 300 2018 was broken. Because i own a 3d printer, i decided to reprint the item instead of asking how much that would be from the retailer. The removal of the old part is either a bit tricky or a whole lot work. I decided to go the tricky way. I will add some Pictures of the repair. On the sixth Picture you see Version 1 of the Clip. It was 2mm too short so the box did not close. It is clearly visible with the fifth Picture of the original Clip from another similar model. Instructions on repair: 1.) remove the 2 screws of the black cover above the box on the front. 2.) remove the cover of the box (pull the front up and be carefull for the clip at the back of the cover) 3.) unscrew the 2 screws that are now visible under the removed cover. 4.) unscrew the 2 screws at the front besides the clip 5.) now you can lift the plastic up, you have to bend it and slide it out of the keycover. 6.) when you bend the frontplate around the clip forward you can now access the screw of the clip and unscrew it, remove the cable and the spring. 7.) finally remove the broken Clip for Installation just follow the reverse order of the steps above and enjoy a working Box!