Honda CRF 250RL to Givi tankbag adaptor

thingiverse

There was no adaptor for Honda CRF 250 Rally for a GIVI tank bag (the handlebars are too close to the filler cap where the adaptor would bolt on to the bike for regular GIVI parts to fit) so I decided to make one. In the end I made 7 versions. First 2 versions that move the GIVI mounting ring roughly 35mm back and up from standard mounting position of the fuel filler cap. Then, since my bike has aftermarket handlebars that are taller than stock I made another version that move the GIVI mounting ring roughly 50mm back and up from standard mounting position. Then I made 3 files with the top tilted 15 degrees backwards, one for each of the 35 and 50, plus one 35 with patterned space for different look. The "standard" files are for regular tankbags which have the mounting positioning cutout on the back. The "Afr Twin" are for Honda African Twin (the CRF 250 big brother) specific tankbag and have the mounting positioning cutout on the right side (regular tankbags would fit, they'll just be rotated 90 degrees counterclockwise). I do call it version 1, but this is very much a work in progress. I only managed to print the "Givi Honda Tankbag Mount Afr Twin 35back 35up V1". Almost. My printer broke 99,7% through the 13 hour print and I'm currently waiting for a spare part. My test print was sliced in Cura with 1.6mm walls and 20% infill. Printed in PLA. It is strong enough for me to stand on it and very stiff no flexibility at all so my worries of this material/technology being too weak to be useful seem unfounded. As always, printer, slicer and material used can affect your results. This will also fit on some other Hondas that use the same bolt pattern on the fuel filler cap.