HomeKey PN532 case

prusaprinters

HomeKey was recently reverse engineered, you can find a link to that here: https://github.com/kormax/apple-home-key-readerI needed a case to mount outside my home and I couldn't find one that looked clean enough so here's my take on it.You'll need:A PN532 module: https://www.amazon.com/HiLetgo-Communication-Arduino-Raspberry-Android/dp/B01I1J17LC/ref=sr_1_34 x M3*8 screws.Wires to connect the module to the board.RJ45 breakout boards: https://www.amazon.com/Teansic-Breakout-Headers-Connector-Horizontal/dp/B0B2P9C3DKThere's many copies of this module, I modeled this case after the red one, specifically with ELECHOUSE on the back.V1 of the case is printed without supports. The lid needs supports and can be printed with multicolor so the logo stands out a bit more.V2 of the case is printed with supports, although depending on your printer you might be able to get away with bridging. The lid needs supports and can be printed with multicolor so the logo stands out a bit more.Mount it by drilling the case beforehand or using double sided tape. The hole for the wires can be oriented towards the top or bottom.This is still a work in progress and I'm not a 100% happy with it, but I decide to publish it anyway in case anyone needs it. The Fusion 360 project file is included for remixes.Thanks to @kupa22 and @kormax for making this possible.