Home Assistant Voice Satellite Enclosure

prusaprinters

This enclosure holds a Raspberry Pi Zero 2 W with a ReSpeaker 2mic hat and a 40mm speaker. It is based on the tutorial on the wyoming-satellite github here:https://github.com/rhasspy/wyoming-satellite/blob/master/docs/tutorial_2mic.mdThe 40mm speaker can be found here:https://www.adafruit.com/product/3968Since the speaker has no screw holes, I was going to glue it to the speaker bracket, but the bracket held it in place well enough on a test fitting that I don't think it's necessary.The opening in the side for USB fits the official Raspberry Pi micro-USB plug, but might need to be resized for any other brand USB plug. I recommend plugging this in before putting the lid on so you can hold the 2 mic hat in place while connecting.Screws are 2.5mmPrinted everything in opaque PLA except the lens which is clear PLA. Glue the lens in from under the lid so it's flush with the top. (photo shows it glued in from the top)Feedback welcome.