HolyStone HS720 & HS720E battery Charging Block (Wall or Desk Mount)

thingiverse

This design was inspired by the only other charge block I could find here on Thingiverse. It is not remixed from the original but totaly designed from scratch in 123D This is a little block (desk or wall mounted if required) to hold the HolyStone Battery Charger and provide an easy way to insert & remove the battery packs from the well devised Original HolyStone Charger. It requies that the battery charging port doors be removed from the original Charger port. It "should" be as easy as removing the metal pin that holds them in place. (check the how I designed this for pictures giving you an idea how to remove the door flaps/covers) Printing material and speeds are up to you, Here are the settings I used for printing in Petg :- 2 shells / walls 15% infill Supports are required and are minimal to save printing time & plastic. Part orientation for printing is suggested as verticle to the build plate to save on support material. ** NOTE ** Not every printer is calibrated for precision printing and not every plastic prints equall, I have tried to allow for this during design, but as with all things 3d printed You may have to scale the part slightly to get a good fit. ** NOTE ** There are 6 files uploaded. (desk version will lay flat on the desk and support both the charging port and batterys) CBds-Battery Charging Desk Block rev4.stl CBds-Battery Charging Desk Block rev4.3mf CBds-Battery Charging Desk Block rev4_2.stl has 7mm dome sticky pad recesses on the rear of the desk block (added on 02-Oct-2021) CBds-Battery Charging Desk Block rev4_3.stl has 10mm dome sticky pad recesses on the rear of the desk block (added on 02-Oct-2021) (Wall Mountable version that will attach via screws to support both charging port and batterys) CBds-Battery Charging Wall Block rev4_1.stl (revised 01-Oct-2021) CBds-Battery Charging Wall Block rev4_1..3mf (for those that insist stl is dead & 3mf is the future. I do not use 3mf so I have no idea if it prints at all !!) This is still in test print and things may change before a final version is updated ... ***Revisions to parts*** revised 01-Oct-2021 :- Wall mount block had the screw mounting holes adjusted for a better look and fit. Also uploaded a 3mf version of the wall mount block & Desk Block revised 02-Oct-2021 :- added desk versions with 4 small recess locations on the rear for dome style sticky pads to reduce any movement on a bench if you choose to stick them on. revised 04-Oct-2021 :- added a bonus part. A small wall holder for the usb power charger housing