Holders for iPhone XS and 11 Max for CD slot in 2014 Ford Escape

prusaprinters

<p>I tried a few different iPhone holder models for CD slots and liked the <a href="https://www.thingiverse.com/thing:2161472">one by Accord56</a> the best as it sits snug in the CD slot, allows you to change the viewing angle, and you can replace the actual phone holder in case you get a phone with different dimensions. However, it didn’t fit my wife’s Ford Escape as the phone kept hitting the small logo underneath the CD slot. So I moved that wheel like part in the insert that connects to the phone to the left side of the insert and also cut away some of material on the bottom of the adapter. I also changed the actual phone adapter to accommodate an iPhone XS in a case.</p><p>VERSION 2: I realized that the original design of the phone adapter didn't allow for a USB cable to be attached to the phone. In this new version, this is now possible. Also, I made the phone adapter a tad larger to have a bit more wiggle room for the phone.</p><p>UPDATE: Added .stl for iPhone 11 Max case.</p><p><strong>If you like what I'm doing…</strong><br><strong>&nbsp;</strong><br>…consider&nbsp;<a href="https://www.buymeacoffee.com/mix579">buying me a coffee</a>.<br><br><img src="https://media.prusaprinters.org/media/prints/35053/rich_content/1a370a7b-cbf9-43fd-927e-979a843d803f/image.png#%7B%22uuid%22%3A%223d10f028-4c6b-406d-8294-7dac5c380665%22%2C%22w%22%3A170%2C%22h%22%3A37%7D" alt="orange_img.webp"><br>&nbsp;</p><h3>Print instructions</h3><p><strong>Supports:</strong> Yes</p><p><strong>Resolution:</strong> 0.1 mm</p><p><strong>Infill:</strong> 15%</p><p><strong>Filament:</strong> eSun PETG Black</p><p><strong>Notes:</strong></p><p>Make sure you print in ABS or PETG as it can get hot inside a car.</p><p>I printed with PETG and used supports for the phone adapter, which turned out to be a royal pain to remove.</p><p><strong>Assembly</strong></p><p>I used a metric 5mm bolt and nut to connect the two pieces.</p>