HobbyWing XR8 Plus ESC Mount/Tray For Tekno's MT410

thingiverse

The Idea of using two-sided tape to secure the ESC to the MT410 didn't seem strong enough, so I came up with this design. After printing the HW_ESC_Base_v9.stl, you'll need to insert seven M3 brass inserts using a heat source like a soldering iron to heat up the brass inserts. Next, glue three o-rings to the three brass inserts that are on the bottom of the HW_ESC_Base_v9.stl. Then, mount the ESC to the ESC base using the ESC bracket first, and secure that assembly to the Tekno MT410 chassis. B.O.M. 3 o-rings (optional). Seven M3 x 3.8mmL brass inserts from McMaster-Carr. Four M3 x 6mm button head bolts. Three M3 flat head bolts that came with the Tekno MT410 for securing the ESC tray to the MT410.