Hobbyking Paramotor replacement parts (collection)

thingiverse

This set contains all plastic parts, used on original Hobbyking Paramotor set: - Front wheel holders (reinforced), including reduced distance elements - Rear wheels holder - ESC holder with modified size (more space for velcro fastening) - Servo holder with three variants (standard, narrow and wide) - Protection guard holder All pieces were printed from black PETG, using 0,4mm nozzle and 0,2mm layer. Other printer settings varies by part (see below). All parts should be printed in position as designed. The front wheel holders are reinforced, it allows to print them without support. For usage, there is necessary to use different (shorter) distance elements. Printed with 3 perimeters, 6 top/bottom layers and 35% infill. Rear wheels holder can use the same setting ESC holder requires support. Servo holder was designed in three variants, standard (same as original), narrow (no space between servos) and wide (more space between servo arms). I am personally using the wide variant, to fit pilot figure inside. Printing without support, 4 perimeters and 8 top/bottom layers. The protection guard holder needs to be very strong, to prevent crack during hard landings. Printed with support (only small under central hole) 5 perimeters, 10 top/bottom layers and 70% infill.