Hobbyhorse show jumping thing!

thingiverse

My little one is absolutely crazy about her hobbyhorse and she loves to bounce around...;-) I decided to create a show jumping thing for her hobby horse! So she can design her own course to play with her favorite toy. Perfect weekend project! It's quite simple to build and easy to print too. All the necessary things should be in every household, as long as you have a 3D printer. Here's what you'll need: 6 empty kitchen towel rolls 2 empty cardboard boxes 2 empty 1.5-liter bottles filled with water The printed parts... To line up the holes for the holder, make the holes on one side and then align the boxes and draw the holes on the other box... If the holes are too big, simply secure the holder with some duct tape from behind. 1 bar = J - PR - J - PR - J - PR - J J = Joiner PR = Paper roll Check out the pictures! Print Settings: Holder: (printed 6 times) Infill: 10% Layer: 0.2mm Support: no Raft: no Print-time: approximately 1 hour Joiner: (printed 8 times) Infill: 100% Layer: 0.2mm Support: no Raft: no Print-time: approximately 45 minutes. I used the following filament: Geeetech black PLA: https://amzn.to/2pQevua On my CR-10, I used this great tape: http://amzn.to/2zXjJGu. It's really fantastic, no extra glue needed, 100% sticky to the printed parts, which come off really easily, even without damaging the tape. On my Ender-2, I use a 1mm carbon plate coated with kapton tape: http://amzn.to/2nPggqi Extra Tip: Another super useful tip is to use kapton tape! You'll get that glossy finish and perfect adhesion like with the blue tape! Check it out: 200mm Kapton tape: http://amzn.to/2nPggqi Have fun! (Amazon affiliate links enabled)