Hobby Plus EVO PRO CR-18P Body Mod Front Magnet and Rear Hinge

thingiverse

You will need to modify your frame to make this work, feel free to remix this if you feel you can make it work without. I hated the way the frame showed so much through the front wheel well, so I moved it all back about 4-5mm.It also puts the body about as low as you can get it without cutting out for the spring mountsUse the Hinge Bottom stl to find where to cut, place it in the hole second closest to the end of the frame, mark and drill your hole. trace the end of the frame and cut.Magnets are 9.5mm from a meus or Injora frame, I'm sure they're out there, 2mm tapered head screws.All additional screws are 2mm, except for the 2 that attach to the body, I used 3mm. To line up the top hinge, it's the entire width of the tailgate, just place it between the 2 body lines where the tailgate stops and mark your holes to drill.