Hive drawer inserts

prusaprinters

<p>Wanted inserts that split the drawer into smaller sections, but didn't like other remixes where the walls were part of the drawer itself, so quickly made these.</p> <p>They shouldn't be tight fit, left in some spacing, since at the moment my printer is not completely dialed in and 'perfect fit' models usually need post processing for me which I wanted to avoid here.</p> <p>Currently just bottom half inserts, at some point will design the top half one's as well.</p> <p>Also for now I have printed only the third-split inserts (which fit fine), but can't be 100% certain there are no issues with other ones</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Creality</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Ender 5</p></div> <p><strong>Rafts:</strong></p> <p>Doesn't Matter</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>Doesn't Matter</p></div> <p><strong>Resolution:</strong></p> <p>0.3</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>Doesn't matter</p></div> <p><strong>Filament:</strong> Generic PLA</p> </p></p></p> Category: Containers