Hitch Pivot

grabcad

Hitch Pivot 1step1: configure material to cobaltstep2:sketch out geometry with dimensions given in blue prints step3: boss extrude to set width --------------------------------------------------HITCH PIVOT 2Step1: use blue prints and sketch out dimensions step2: cut trough the center of using cut extrudestep3: use circle tool on back face to cut extrude---------------------------------------------------HITCH PIVOT 3step1: on the side of the face use convert entities and make a sketch that will be cut extruded step2: use off set entities tool to set the reverse direction to 2mm step3: before cut extruding draw a second line inside the cut through set to 2.5mm that way you don't cut through the whole piece of geometry step4: measure the width of the object you're going to cut extrude and subtract it by the offset distance (do this with both cut extrudes)step5: cut extrude both entities and you will be done