Hipercube complete Pitan Extruder for ArgentoV6 with BFPTouch, cooler and fan and Malevo.

thingiverse

I create remix and add some components to make this compact extruder work with BFTouch. I redesign some parts to make it more reliable. For the Bill of Materials, refer to the original parts. https://www.thingiverse.com/thing:2890554 https://www.thingiverse.com/thing:2895614 https://www.thingiverse.com/thing:3158589 https://www.thingiverse.com/thing:2890290 The "fins" are removed, and the entire assembly is screwed together, ensuring a strong impression of the pieces, resulting in a very robust extruder. For the engine, an Epson Em-400 was used; the EM-383 or 287 also work, any low-torque motor will do. These motors have a 4mm shaft, which needs to be filed down to flatten one part. Gears for 4 and 5 mm are included. The sensor on the BFTP is an M3 screw that has been cut and tapped to 45 mm. ------------------------------------------------------ Update November 11, 2018 For the motor, I fixed the Imax at 0.4A, so my drivers are A4988 with R100 as Rs (0.1 ohms). Vref = Imax * 8 * Rs = 0.32V. Everything is working fine. Another thing that was asked was about the Z offset, and I left it at -1.9. However, this depends on several factors, but it's roughly around there. The steps per cm of the motor/malevo assembly came out to be exactly 400.