Hinged lid for adding MMU2S to Original Prusa Enclosure

prusaprinters

<p>Printable accessory for Original Prusa Enclosure developed to enable access from the top. Can be used for a standalone printer or for a printer with a multi-material unit on the frame.</p><p>Check the step-by-step guide on how to install the&nbsp;<a href="https://help.prusa3d.com/guide/hinge-lid-addon_354154">Hinged lid</a>.</p><p>In case you want to use the Hinged Lid without the MMU you can use <i>Hinged-Lid-Complete_0.3mm_PETG_MK3S_5h58m.gcode </i>or you can turn off <i>MMU-grommet </i>in the 3mf file</p><p>In case you want to use the Hinged Lid with Advanced Filtration System you need to print Hinge-bracket-Rt instead of Hinge-bracket-R</p><p>To mount the Hinged lid you will need the following fasteners*:</p><ul><li>M3x8 screw (15x)</li><li>M3nS nut (1x)</li><li>M3 nut (8x)</li><li>Pin 3x20 (2x)</li></ul><p><i>* The package of the Original Prusa Enclosure includes extra fasteners, which were added in case you wanted to install the Hinged Lid.</i></p><p>&nbsp;</p><h3><strong>Print instructions</strong></h3><p>You have three options:</p><ul><li>use the pre-sliced G-code and print it on your MK3S+</li><li>use .3mf file for accurate setting of perimeters and supports</li><li>download the latest&nbsp;<a href="https://www.prusa3d.com/page/prusaslicer_424/">PrusaSlicer</a>&nbsp;and use the following settings**:<ul><li>print settings: 0.30mm DRAFT</li><li>filament: PETG (tested on Prusament)</li><li>20% grid infill</li><li>minimum of 8 perimeters</li><li>turn on <i>thin wall detection</i></li></ul></li></ul><p><i>** Note that this setting is the minimum possible due to the strength of the parts, but you can experiment with your own settings.</i></p>