Hi-Res Automatic Transmission Model

thingiverse

Remix of Automatic Transmission Model by emmett: https://www.thingiverse.com/thing:34778 The STL's were seriously segmented in a few areas that made it ugly to look at. Even worse, when I went to look at the OpenSCAD model, there were missing libraries! So I've included a copy of all of them (the CC-BY-SA license applies ONLY to emmett's stuff and does not apply at all to the libraries), and made the necessary adjustments to allow the model to be high-res and print smoothly. No pics because I haven't printed it myself yet, and knowing me, I'll probably forget once I do. **NOTE:** the original has `front_loose.stl` and `back_loose.stl`. While I can't confirm which version this model has, it appears to be the loose one. UPDATES ------------ **2022-02-11** - Original Upload **2022-02-16** - `pins.scad` replaced with correct version - Shaft, planets, idler, and pins re-uploaded (they were faulty in the original upload) - `brace_loose_1.25.stl` and `brace_loose_1.5.stl` added. These open the brake holes by 125% and 150% respectively, to prevent welding of the brake to the brace itself. - `transmission.scad` updated to include method call for `brace_loose()` - ~~`shaft_95.stl`, `pin3_95.stl`, `handle_95.stl`, and `crank_95.stl` added. These is the same as their non-`_95` counterparts, except scaled down by 95% so the shaft fits better inside the gears.~~ **2022-02-24** - Fixed `crank.stl` (it too was faulty in the original upload) - Uploaded missing `handle.stl` - Updated `transmission.scad` to include `handle.stl` tweak that made pin fit a bit tighter - Removed `_95.stl` variants as sizing became a bit odd on my Ender 3 clone, it's easier to just scale in the slicer manually - Alphabetized file list