Hex Touch Button

cults3d

This is an enclosure for a popular touch sensor board based on the TTP223. Enclosure is made from two parts that snaps together. The "lid" is the thinner one and is meant to be attached on a surface, the "base" is the thicker part that homes the sensor and is mounted on top of the lid (yes I know is a bit strange call "lid" the part that remains fixed, but it's also the thinner part). There are 2 variants : "hextouch_closed" and "hextouch_open". The "closed" one is made for passing cables through the lid, the "open" one is made for passing cables from top of the assembly. For the closed one, you must solder cables directly on headers, for the open one, you must solder a 3-pin male header along the board (see pictures). Lid is present in two versions for both closed and open variants: with (holes) and without (noholes) mounting holes. I designed so the lid will be attached to a wall or to a wood panel using screws (holes variant) or double-adhesive tape (noholes variant). For a sensor setup you can see this reel on Instagram Example application