Hex Stratocaster Guitar Body

prusaprinters

The body consists of 7 parts. Every piece needs glued together. I sanded all the mating faces and used epoxy for plastic, then clamped them and let them dry. I included a file for a pin. 10 of these are needed to link/align the pieces when gluing. The top middle and middle parts need to be strong (ideally solid) due to the forces from the strings. I also joined these 2 parts with steel rods i found at lowes (one is about 10 mm in diameter, the other is about 7 mm). the 10 mm rod should be cut to about 240 mm long, and the smaller one to 170 mm. All 5 surrounding parts i printed with default settings (2 perimeters, 15% infill). I specifically designed this to replace a squier affinity body. The letters were removed on the model i uploaded. I attached stl files for convenience. I also attached step files for you to modify (for different guitar specs, add designs/initials, etc).