Hex Key Clip-on Holder (updated 03-04-2022)

prusaprinters

Hex Key Clip-on Holder(Updated so it scales properly using PLA to form a good snap fit without all the faffing about)This snaps into the right hand ‘z-axis-top’ hexagonal hole of the Prusa i3-Mk3s' right hand ‘z-axis-top’ printed piece.Filament:  PLALayer height:  0.2 mmNozzle:  0.4 mmInfill:  15%If you use a material other than PLA you’ll have to change the scale.Try the clip.stl file (the clip itself) to see what scale works before printing the hex-key-clip. It should be a quick print at 0.3 mm layer height – quicker if you cut the print down in PrusaSlicer. ***I’ve included the basic clip OBJ and GCODE files if you want to adapt this for some other kind of holder or gadget.  Just make sure nothing you add will crash against the moving parts of the printer – especially if you install something on the left side or facing front.You could employ the basic clip design for LED lights either side.Note that this hex holder is for up to 9 keys not all of which are required by the MK3 printer but are handy to keep all in one place.Regards, Paul