Hex bit holder - 18 bits

prusaprinters

<p>I EDC a screwdriver with storage for 6 bits in it, but wanted to carry more, so I came up with this little holder that suits my needs perfectly. I took some inspiration from the Wera bit-check and designed an holder with space for 18 bits, arranged in groups of 6. it features a swing open cover, which allows it to be put in a bag or pocket without losing all the bits. You can also push the bit you wish to use out from the bottom of the holder, making it a bit easier to extract.</p><h4>Printing</h4><p>I printed mine out of prusament PLA, but any material should do the job if you don't plan to use the holder in particular conditions.&nbsp;</p><p>Layer height doesn't really matter for this one.</p><p>I used four perimeters to make it stronger, but it's probably overkill.</p><p>No supports are needed.</p><p>You might want to use a brim when printing the cover as it doesn't have very much surface contacting the bed</p><p>The body should be printed with the holes for the bits facing downward and the cover should be printed laying on its side.&nbsp;</p><h4>Assembly</h4><p>Just flex the cover slightly and slide it on top of the main body, lining up the hinges and you are done.&nbsp;</p>