Hex Bit and Driver Holder/Case

prusaprinters

<p>This is my first design with Fusion 360. I have a large assortment of hex bits that do not have a home and they sit lose in my toolbox, this was designed to help fix that issue. This is not perfect but it does what I need.</p><p>The bits do not sit snug in the holes, that was by design originally but I feel a second iteration would have a more snug fit and hex shaped holes instead of circular.&nbsp;<br>There is a slot to store a driver handle that I have designed and am printing as I make this. I will post it separately and put a link/reference here.</p><p>I've printed this on 0.35 layer and 10% infill and it works well. As there are fillets near the top of the openings and around the corners, a variable layer height may be a good idea and make it a little finer near the top. I used PLA but I suspect anything other than flex would be fine.</p><p>The main shape is 100 X 70 mm. The depth of the bit holes is only 5 mm and could be a little deeper, the bits do not fall out without tipping about 90 degrees. The driver handle slot is 15 mm deep.</p><p>The top layer being white in my images was just a mistake, I ran out of red like 2 layers from completion. Pretend you don't see that.</p><p>I hope you like it, let me know what you think!</p>