Hex adapter for Losi Mini B/T to axial 1:18 yeti Tires (12mm)

thingiverse

This is an adapter/spacer to fit the Axial yeti 1:18 tires onto your Losi Mini B/T truck. it also moves the tires out 2mm to be able to clear the non-threaded axle stubs. You will need to use a washer before you can tighten the nut down because the center of the tires are recessed too far for you to be able to easily tighten down the retaining nuts otherwise. These are printed as a near 1:1 fit, so you likely will need to do a little gentle sanding or scrubbing a exacto blade around it to get it to fit. I STRONGLY advise you to remove the original hex part out of the truck, press fit them together into this printed part, then put it back on the truck to avoid accidentally damaging your vehicle fitting them together. CAUTION: Also be aware these are much taller tires than stock, so you will likely want to go DOWN in pinion size/tooth count, and/or UP in spur size/tooth count..... or you risk overheating your motor!!!