HevoRS Eva Orbiter Mosquito / Dragon Hotend Mount

thingiverse

HevoRS print head inspired and modded Eva-3D print head (https://main.eva-3d.page) Fits to the HevoRS mount from #hevtec design. all parts have to be printed in same direction like the part is placed in the stl file. for all parts an infill of 25% is sufficient. Only the HevoRS Adapter and the Main Eva Face should be with an 50% infill, to be able to take the little Orbiters forces. For the mosquito hotend use following parts: - Mosquito Face - Mosquito Support For the dragon hotend use following parts: - Dragon Face - V6 support All screw sizes are listed in the BOM of the Eva project (see link above) Please be aware that on cold extrusion the Orbiter is breaking the stand (i´ve practiced it once, lol). All screws are M3 sizes. On Dragon hotend you´ll need flat hat screws behind the hotend. 210514 Update to V2: After 1 kg of Filament with the new head, i had some structural issues with the head. It was too weak. I´ve modified the original HevoRS MGN12H Adapter and added 5 screws to hold the head attached to the X-Axis. The Orbiter was also too strong for the design. I´ve also increased the infill to 50%.