Herringbone Planetary Fidget

prusaprinters

<p>Hello Fidget friends! This is my 9th version and the first one I upload here. I think by now everything is perfect.</p><p>For the finished fidget you need the following parts:</p><p><br>- 1x part 1 (printed in the first color) when slicing the part I recommend to scale the 6 planet wheels {picture 4 the red ones} to 99% for X and Y, Z stays at 100%) the scaling can be between 98% and 100% depending on the printer and calibration, for me 99% worked best)<br>&nbsp;</p><p>- 1x part 2 (printed in the second color)</p><p>- 1x optional tool (color doesn't matter, this "tool" is inserted in the middle of the finished fidget and clamped with the tang in the drill to "<i>break in*</i>" the fidget)</p><p><i>*break in</i><br>With the drill press, run the gear left and right for several minutes. Afterwards, I recommend adding some Teflon grease to the gear.</p><p>Finally, connect all four parts with some superglue.</p><p>&nbsp;</p><p>Printer settings:</p><p>0.16 layer height&nbsp;<br>3 wall lines<br>15% cubic infil<br>PLA</p>