Hermera Mount plate for Coreception / ELF

prusaprinters

<p>Version 4.</p> <p>major changes. I have cut the mount into 2 parts. A gantry plate and a hermera plate. They can both be mounted then secured together via the m3 nut that is pressed in. These can both be assessed on the left side of the gantry. This version moves the hemera about 12 mm back and makes it even easier to install. You still loose 15 to 25 mm on the x due to the width of the hemera itself. You can simply subtract the distance from the build plate since it is lost on the opposite side from the end stop. I did not have to move my end stops the hemera filament lever hits on the back one like it was made to do it. enjoy.</p> <p>I Have uploaded a new version. channel for the part fan cable. And cutout to allow better access to the cable pass through. I do have it on the printer. You do lose about 25 mm on the x axis.</p> Category: 3D Printer Parts