Hemera mount for Ender 5 EZABL

thingiverse

This is a remix of Elescar's Ender 5 mount and Joe Casha's Ender 3 mount. The design works on any Ender 5, as I installed it on mine that has a linear rail mod. During installation, I discovered a couple of things: Use the cable provided with the Hemera kit for the extruder motor. I initially tried using the Ender 5 cable and experienced issues due to different wiring configurations. The original cable would not work at all, while the Hemera cable resolved the problem immediately. You will lose about 10-15mm on the right side and front after installation. After measuring the extrusion, I found that 340 esteps were accurate. Many users have reported varying values such as 463 and 415; however, my measurement of 250mm extrusion with 340 esteps was only off by 1-2mm. You can watch a video demonstrating the installation process here: https://www.youtube.com/watch?v=mSIcFcq5_Ww I also designed a top filament holder that you can find here: https://www.myminifactory.com/object/3d-print-ender-5-top-filamnet-holder-108644 2020-02-23 Update: I have created a new design for a Hemera (Hemeres) mount using linear rails. This design will work on both the Ender 5 and Ender 5 Plus printers. You can find this design here: https://www.thingiverse.com/thing:4163017 Additionally, I have developed a complete set of mods for the Ender 5 Plus that many users with an Ender 5 may also find useful. You can access these mods here: https://www.thingiverse.com/thing:4162889 2020-01-04 Update: Several users have requested a mini version of the EZABL mount, but I have not tested it as I don't own one myself. If you could provide feedback on its functionality, that would be helpful. Alternatively, I can provide you with a link to Tinkercad so you can create your own version. I have also added a side mount for a bowden tube to support the wiring. This is an attempt to make it a part of the design and will be used in my second Ender 5 printer. You can see how I previously strapped a bowden tube to the side for support by looking at the pictures from the original post. Furthermore, I have added a PDF document detailing the wiring from the Hemera to the control board. To correct the issue of the Hemera and fan hitting the front crossbar, I found a simple solution that you can find here: https://www.thingiverse.com/thing:3876601 This mod also allows for more area in the extruder's movement forward. In addition, I have thought about the challenges of installing the Hemera on a standard Ender 5 and came up with a possible solution to move the electronics to the back of the printer. You can find this mod here: https://www.thingiverse.com/thing:3908933 01/17/2020 update: I have added a y-stop with cable support for the new wiring on my Hemera.