Hemera CR-10S Pro Conversion

thingiverse

07-10-2020 updated plate https://www.thingiverse.com/thing:4608837 28-09-2020 Next batch is up on eBay https://www.ebay.com.au/itm/224167492478 Hemera upgrade, CR-10S Pro. 26-08-2020 Added .step file for V2 Plate Bl Touch Mount. 20-08-2020 Added .dxf file for updated flat pattern. Added BL Touch mount for updated plate. 30-07-2020 I will be offering another batch of the aluminum plate for sale on eBay. I will include the link when my listing goes live 27th of January 2020, I have uploaded a .step file of the flat pattern. The. stl of the backing plate is just for reference The probe mount and cable keeper are printable functional parts. You will need, 3mm aluminium sheet. M3 Tap. Small counter sink bit. 4 x M3 x 5 Unbrako countersunk hex drive bolts for attaching the hot end to the plate. 2 x M3 x 6 dome heads for attaching the probe mount. 2 x M3 x 5 grub screws for locking the probe in position. I printed the probe mount in Carbon Fiber Nylon and ran a M3 tap through the holes. I have uploaded a mount that can be bolted from the front. the mounting holes in the plate will now be M3 thread, care must be taken not to over tighten and strip the threads.. The eccentric nut and bolt need to be assembled with the head of the bolt on the front side of the plate. A standard M5 nut will need to be used to replace the Nyloc M5 Shorten the bolt so it is flush with the nut, this is so it clears the cross-member brackets. The top right bolt will need a flat ground in the head, so it clears the hot end. the hot end fan will need the corner filed to clear the lower bolt head. Bolt on hot end with the top right wheel bolt and lower bolt in place. Both top wheels can be installed and tightened. Place bracket in position and install the bottom wheel on the bolt, Adjust eccentric nut and tighten fixing bolt nut. Reinstall and tighten belt. If you download the files please consider giving me a tip, if you remix my design please credit me with the original concept.