Hemera Aluminium adaptor plate V2, CR-10S Pro

thingiverse

I have uploaded a drilling guide to change the ABL mounting holes on the original plate to Suit the version 2 plate ABL mounts. BL Touch Offset { -38, -2, 0 } Z offset approximately -3.10 The eccentric nut and bolt need to be assembled with the head of the bolt on the front side of the plate. A standard M5 nut will need to be used to replace the Nyloc M5 Shorten the bolt so it is flush with the nut, this is so it clears the cross-member brackets. The top right bolt will need a flat ground in the head, so it clears the hot end. the hot end fan will need the corner filed to clear the lower bolt head. Bolt on hot end with the top right wheel bolt and lower bolt in place. Both top wheels can be installed and tightened. Place bracket in position and install the bottom wheel on the bolt, Adjust eccentric nut and tighten fixing bolt nut. Reinstall and tighten belt.