Helmet torch clamp/holder 26mm and 32mm torches

thingiverse

There are 2 versions of each size. The files with _narrow on the end are lower profile versions which use the helmet as part of the hole for the bungee making it closer to the helmet and is my preferred version (pink picture). The ones without _narrow on the end are the original ones which are fully enclosed holes in the design (yellow pictures). Helmet torch clamp/holder 26mm and 32mm torches for helmet mounting - designed these specifically for diving but can be used for any sports with a helmet - torches lock in without bungee cord but for added security, 4mm bungee cord can be used with flat or curved clip (I prefer curved) to lock them in place. Curved clip allows a simple flick of the clip to unhook and easy to grab and reattach. 32mm diameter torch (65mm length) with curved support for helmets. Designed for the Northern Diver Varilux Travel II diving torch but will work with any 32mm diameter torch. Requires 2x M5 button head bolts + 2 nuts (I like nyloc nuts). I used 12mm bolts for my specific helmet (Palm AP4000) 26mm diameter torch (45mm length) with curved support for helmets. Designed for the Mares EOS 10RW diving torch but will work with any 26mm diameter torch. Requires 1x M5 button head bolts + 1 nuts (I like nyloc nuts). I used 12mm bolts for my specific helmet (Palm AP4000) 2 different clips. One flat, one curved. I prefer the curved as easier to grip. They are already in right position for printing best (at an angle so flat to the edges, not the tube). Printed on 0.2mm layer height. Supports not needed but may help for the bits that stick out. I used PETG as better salt water resistance and more flexible than PLA.