HellBoy Model Miniature Assembly File STL OBJ 3D Printing 3D print model

cgtrader

https://www.youtube.com/watch?v=oMFX8EP__jQ&t=59s follow me FACEBOOK: https://www.facebook.com/groups/1797954133626126/?ref=bookmarks ISTAGRAM: cody3d1 https://www.instagram.com/cody3d1/ TWITTER: https://twitter.com/Cody3D ARTSTATION: https://www.artstation.com/cody3d Hellboy 3D Model for Printing, specifically designed for FDM-FFF and DLP-SLA-SLS printing techniques, Miniature Assembly Figure, 1:8 scale for FDM-FFF, 1:14 scale for DLP-SLA-SLS. More than 200 hours of meticulous modeling effort Two distinct versions available - one with long horns and the other with short horns. Dimensions are scalable using various slicer software applications. The total point count is a staggering 4,178 million points. Each file has undergone decimation to minimize polygon counts while maintaining precise details, allowing the model to be suitable for printing on virtually any computer. This results in incredibly lightweight files without sacrificing quality or integrity. Dimensions: FDM-FFF: Z-axis: approximately 31 centimeters (12.2 inches) X-axis: approximately 12.5 centimeters (4.9 inches) Y-axis: approximately 15 centimeters (5.9 inches) DLP-SLA-SLS: Z-axis: approximately 13 centimeters (5.1 inches) X-axis: approximately 6.9 centimeters (2.7 inches) Y-axis: approximately 7.1 centimeters (2.8 inches) The Hellboy 3D model is designed to optimize print results without focusing on material consumption. Each part of the model can be scaled, rotated or manipulated to best suit your specific printing needs. Model details: • Designed for clean prints • Every part cut vertically to ensure optimal quality Recommended Settings: Print the upper parts with a 4-5 skirt setting Skirt Speed: 30mm/s Bottom/Top pattern: Lines Quality Control: Layer Height: 0.1mm Initial layer thickness: 0.3mm Bottom/Top Pattern: lines Horizontal expansion: 0.04mm • Layer Height 0.1mm recommended for a better print quality, though this will increase the printing time to nearly double. Printing Setup: Infill speed: 30mm/s Outer shell speed: 30mm/s Inner Shell Speed: 20mm/s Top/Bottom speed: 20mm/s Support Speed: 50mm/s Travel Speed: 150mm/s Recommended for FDM-FFF printers, these settings will produce an outstanding Hellboy model: Infill Pattern: Grid Line Distance: 1.5mm Infill Overlap: 20% Inner layers: disabled