HELLA Horn cover Subaru WRX STI

thingiverse

The Hella horn cover replacement was designed and tested specifically with the Hella Sharptones in mind, although it is assumed that it will also fit perfectly on supertones. To achieve the best possible final appearance, printing the logo at the top of the cover is highly recommended. This process will require a certain amount of patience as it involves the careful removal of support material from stars. Using the support interface feature in Cura can significantly simplify this process and make it much easier with this particular model. Current Printer: The Anet A3 is being used, paired with an E3D V6(clone) hotend, a bowden tube, and a remote extruder for added flexibility. Current Print Settings: * Layer Height: Set to 0.1mm to achieve smooth radius corners. * Wall Line Count: Set at 3 for optimal results. * Top Layers: 5 layers are applied on top for added durability. * Bottom Layers: 3 layers are applied at the bottom for a solid foundation. * Ironing Enabled: This feature is enabled to enhance print quality. * Infill Density: 60% is used to strike the perfect balance between weight and air permeability. * Fan Enabled: The fan is activated to ensure a smooth finish. * Support Enabled: Supports are generated, and they touch the build plate for added stability. * Support Z Top Distance: Set at 0.3mm to prevent supports from interfering with the print. * Support X/Y Distance: Set at 0.8mm to maintain optimal support material spacing. * Support Interface Enabled: This feature is enabled to simplify support removal.