Heavy 2.5" HDD/SSD case

thingiverse

Heavy duty enclosure for my 2.5" hard drive module. **Minimum printer footprint: ** 50x90x120mm **Estimated printing time: ** 7 hours No support or raft required. # Bill of materials: - Four M3*18 screws with nuts - Protective foam or thin rubber sealant - SATA to USB adapter https://www.aliexpress.com/item/SATA-Cable-Converter-USB-3-0-Cables-22-Pin-SATA-Hard-Drive-Adapter-Laptop-2-5/32998925790.html?spm=2114.search0604.3.7.3efd7a5718cWvx&ws_ab_test=searchweb0_0,searchweb201602_5_10065_10068_319_10892_317_10696_10084_453_454_10083_10618_10304_10307_10820_10821_537_10302_536_10843_10059_10884_10887_321_322_10103,searchweb201603_52,ppcSwitch_0&algo_expid=30bd26f7-abef-4803-a4c4-8b6a51e1c138-1&algo_pvid=30bd26f7-abef-4803-a4c4-8b6a51e1c138 or https://www.ebay.de/itm/USB-3-0-SATA-to-USB-2-0-Adapter-Cable-USB-2-0-TO-USB-3-0-SATA-7-pin-connector/263976713478?hash=item3d763cfd06:g:k7wAAOSwIVVcahFv:rk:48:pf:0 # Assembly Instructions: - First, open the adapter and assemble the two small components using 2 screws. - Add protective foam or rubber sealant (<1mm thick) around the disk before mounting the last part. Be cautious of the sides as some disks may have a "Do not cover" hole; do not cover it. You might need to sand down the small parts slightly (where there are screw holes) if you printed with support material. - Assemble the third component and close the case using 2 screws. # Sample Print Settings: Small components: Infill: 30% Support density: 10% Speed: 60mm/s Layer thickness: 0.2mm Time required: 2 * 1h30 Large part: Infill: 20% No support (vertically printed, screw hole at the base) Speed: 80mm/s Layer thickness: Adaptive Time required: < 4 hours