Heated filament dry box

prusaprinters

A remix of RichRap's heated filament dry box https://www.thingiverse.com/thing:2778707…which is another dry box (flat) mount for a heated pad/mat with 6025 axial fan and rounded (43mm) hygrometer+thermometer. You will need to assemble and glue the parts together.You can refer to the images attached for reference. Instructions:Print these parts:1x Front_left_v11x Front_right_v1 1x Back_left_v11x Back_right_v12x PinYou will also need these parts:Suitable container as the dry box. I use 35x22x24 cm size container7W / 12W reptile heat mat/pad size 28x15 cm or 27x15 cmRound hygrometer+thermometer combo size about 42-43mm in diameter6025 fanPG9 cable gland (for size 5-8mm) Print SettingsPrinter Brand:CrealityPrinter: Ender 3 v2Rafts:Doesn't MatterSupports: Depends. Orient your prints accordinglyResolution:0.28Infill: 20%Filament: Smith3D PLA+ / PLA Pro Light Blue Notes:0.4mm nozzle.Printed with CHEP's FF fast 0.28 profile.You can print with normal speed at 0.2 layer height and more infill if you want Custom SectionOption #1: Filament spool rod hangerThe hanger is a design remix to fit OD=43mm pvc tube to be used with button head screws.Hardware required:m4 x12mm button head screws x6m4 nuts x6Print without support.The file to this thing can be found here: https://www.printables.com/model/222161-filament-rod-43mm-hanger Optional #2: Filament feed tube merger 6mmI built a 3 spool dry box with oversized feed tubes (OD=6mm, ID=4mm). This remix to Robinder's original design merges 3 tubes instead of 4 from the original design.Printed mine with 6.3mm hole diameter for the feed tube but the tube was loose inside the exit hole. Redesigned with 6.2mm hole so hopefully it fit better.Can be printed without support.The file to this thing can be found here: https://www.printables.com/model/222162-filament-feed-tube-merger-6mm Optional #3: Silica gel (Desiccant) container with sliding lidThis is a container assembly (dove tails, push fit) of 6-parts with mesh (sort of) holes and a sliding lid. The container size is 150x55x40 mm.Every hole is 2mm in diameter so you can use smaller size silica gel / desiccant.You will need to assemble and glue the parts (front, left, back, right and base) together.The file to this thing can be found here: https://www.printables.com/model/223590-silica-gel-desiccant-container-with-sliding-lid