Hearts Stretchy Bracelet

thingiverse

Stretchy bracelet with raised heart on each segment (or each 2nd segment for v3 variation). Looks great if printed with silk PLA filament (see make photo). The print time should be around 40 mins and only requires around 6g of filament. Please note the slicing instructions below. Remixed from Emmett's great stretchy bracelet design and using his "exploitable heart" 3D shape. INSTRUCTIONS FOR SLICING: The STLs use solid format - which needs to be converted to hollow format for printing: In the slicer settings need to turn off the top/bottom layers, select zero infill and 0.4mm wall thickness (single layer). Also select Spiralize Outer Contour option to avoid layer change marks (may need to add this option using settings/configure setting visibility). These STLs have an inside diameter of 55mm, so scale as necessary. Width of the band is 15mm. I have test printed in Silk PLA+ and seems quite strong and stretchy - but avoid overstretching. If you like this design please press the Like button. ⚠Warning⚠ Be careful in environments with young children and pets! This model contains small parts. If not properly stored in an environment with young children or pets, it may lead to accidents such as accidental ingestion or injury. If infants or pets are present, please take appropriate measures depending on the situation, such as refraining from 3D printing or storing in an appropriate place. Do not apply strong force! Applying strong force to a 3D printed model or throwing it may damage the model and lead to accidents such as injuries. In addition, debris from damage to the model may be accidentally ingested by infants or pets. If the model is damaged, dispose of it immediately. Store them in an appropriate place. After 3D printing, store the model in an appropriate place out of reach of young children and pets. Proper adherence to the precautions will ensure the safe use of the model.