HeadPlay HD FPV Headset Battery Holder (any battery)

thingiverse

Another battery holder for the fantastic HeadPlay FPV Goggles, this one is designed to work with any size battery. Check out my previous design made specifically for the stock battery here. To use this holder, place your battery inside and secure it with the velcro strap. Then fold the battery against the backplate of the headstraps. Tighten the bolt firmly but not too tightly so you can easily open and close the holder without adjusting the bolt. Any resolution and infill setting will work for printing, but I recommend using at least 40% or more infill to minimize the risk of the holder breaking when removing the battery if the bolt has been tightened too much. If you have any suggestions or ideas for an updated version, don't hesitate to contact me. If you don't have access to a 3D printer, I can print one for you at a small fee. **Print Settings** **Printer Brand:** Ultimaker **Printer:** Ultimaker 2 **Rafts:** No rafts needed **Supports:** No supports required **Resolution:** 0.2 mm resolution **Infill:** 50% infill density recommended