Headphones stand with cable holder and easy stand print

thingiverse

I really loved this headphone stand so I decided to adapt it to my needs in the hope that someone else would find a use for it. WHAT I CHANGED: I wanted to use the stand for my wireless Philips headphones so I decided to put a cable/charger holder on the back. Also, since I sanded the whole stand I decided to modify the base part of the stand in order to make the layers print much nicer. That way it can be sanded much smoother and with far less effort to keep the smooth curved lines. The picture in the preview shows how to rotate the print. Given the size and shape of my headphones, I noticed it was perfect to print the model at 60% of the original size. However, adjust accordingly to your needs! Print Settings: Printer: Rostock delta modified Rafts: Doesn't Matter Supports: No Resolution: 0.1 - 0.2 mm Infill: 10 -20 % Notes: For the base part of the print use slower speeds to allow the filament to cool and avoid ugly overhangs. For the "stand" part of the model, adjust the Z offset to make the first layer print even.