Headphones (DT-series pads)

thingiverse

# 3D printable headphones ### Features: * 3D printable * 40 mm drivers * Utilizes Beyerdynamic DT770/DT880/DT990 earpads and headband * Mini XLR socket * Open/closed versions of the earcups * Designed with durability and repairability in mind ### Parts to assemble: | Count | Part | Filament | Notes | |:-----:|:--------------------------------:|:--------:|:--------------------------------------------------------:| | 1 | earcup | Hard* | Houses the driver. | | 1 | earcup_xlr | Hard* | Houses the driver and the mini XLR socket. | | 2 | driver_plate | Hard* | Holds the driver. Inserted into earcup. | | 2 | driver_plate_ring | Hard* | Holds the driver_plate in place in the earcup. | | 4 | driver_bracket | Soft** | Holds down the driver to the driver_plate. | | 2 | driver_gasket | Hard* | Gasket for the driver. Inserted into driver_plate. | | 2 | earcup_band | Hard* | Goes around the earcup. | | 1 | headband | Hard* | | | 2 | slider_part_1 | Hard* | Part 1 of the slider mechanism. | | 2 | slider_part_2 | Soft** | Part 2 of the slider mechanism. | | 2 | slider_rod | Hard* | Slides into the slider part 1 + part 2. | | 2 | 40 mm driver | | Inserted into driver_plate. | | 1 | Mini XLR cable | | | | 1 | Mini XLR socket | | Mounts to earcup_xlr. Mounting hole diameter is 11.4 mm. | | 1 | 3-4 mm wire | | 2 wires inside. Connects the earcups/drivers. | | 2 | DT-series earpads | | Attaches to the earcups. | | 1 | DT-series headband | | Attaches to the headband. | | 8 | M3 insert | | Heated and inserted into driver_plate. | | 8 | M3 nut | | Inserted into slider_part_1. | | 8 | 25mm? M3 screw | | Screws for the slider mechanism. | | 8 | 4mm M3 screw | | Screws the driver_bracket to driver_plate. | | 2 | 10mm M3 screw | | Screws the slider_rod to earcup_band. | | 2 | 73mm diameter felt fabric circle | | Optional: used for tuning the sound of the open earcups. | \* Filaments such as PLA, PETG etc. \** Filaments such as TPU, TPC, TPA etc. ### Notes * Mirror the parts depending on your setup (cable on left/right earcup etc). * Use as small and narrow M3 inserts as possible, some of the cheaper/wider ones may not fit. * Use countersunk screws. For more information visit the GitHub repository: https://github.com/ignasrum/headphones