Headphone Stand V1

thingiverse

I pushed myself to create something practical in as short a time frame as possible from scratch. It took under 2 hours to finish designing the CAD model. This is the initial version of the headphone stand, and I want everyone to build on this design by making it stronger with more features. (Adding phone stand/charging station/cooler design). Use it for your education or need, learn how you can create things that benefit everyone. Also, to make it fun, challenge yourself by building something from scratch in as short a time frame as possible. Let your imagination work and tackle one problem at a time! Print Settings Printer Brand: FlashForge Printer: FlashForge Creator Pro Rafts: No Supports: Yes Resolution: Standard Infill: 15% - 30% Notes: Print Notes: Headphone_Leg_v1 must be printed at 25% - 35% infill to ensure it does not break, because it will undergo stress. Headphone_Holder_v1 requires support added where there's a rectangular opening depending on how you position the part on your print bed. Materials Needed Required Material: Screwdriver Sanding file M3.9 Size, 25 mm Long or similar size screw (For Stand & Leg) M3.9 Size, 19 mm Long (For the Leg & Holder) [OPTIONAL] I didn't use the 19 mm for my print because the holder was really tight for the headphone_leg, so I left it assembled without using any screws. You can print the headphone_holder_X and force it in the leg to save a screw.