Headphone Stand

cults3d

I saw Makerbot's headphone stand and thought that it wasn't very impressive in terms of looks or size. So I decided to make a 'better' headphone stand. INSTRUCTIONS: You have three options. 1 - Folding Headphones: Print it as one piece to fit your bed, which might not be large enough for standard headphones. This is based on a 200x200mm print bed. Scaling up to a 300x300mm print bed may be just big enough to fit standard headphone sizes. 2 - Print Headphone_Stand-Tall.stl, which should be tall enough for your headphones. This may be taller than your printer build area, so it depends on your printer's capabilities. 3 - Non-Folding Headphones: Print the 4 parts separately and then glue them together. The 4 separate parts are scaled larger to fit standard headphones when assembled. You might have to scale down the file to fit your print bed. Orient the face you want to print on by using Cura's flatten to bed feature, which is located in the rotation menu. Alternatively, Simplify 3D's flatten to bed feature can be accessed through the edit menu (ctrl-L or apple-L). Other slicers may have different features. There are two main faces to print from. The easiest option would be the back face. If you have amazing bridging capabilities on your printer then you can print it on the bottom face. Print, use, and enjoy!