Headphone / Audio Jack Extender (Under Desk or Wall Mount)

prusaprinters

<p>The audio jack on my PC is hard to reach so I made this extender which I mounted under my standing desk. It uses a cable strain relief boot that I printed in TPU, and I recommend using TPU for the cable boots. However, since TPU is still a bit of specialty thing and can be hard to print, I included a “hard” cable boot which can be printed in PLA or PETG (Audio_extension-1H-CABLE-SR-PLA-A.stl and Audio_extension-1H-CABLE-SR-PLA-B.stl). Thanks to <a href="https://www.printables.com/social/163978">Campo_da_Gator</a> for posting the make using the “hard” PLA cable boot, and confirming that it works!</p><p>The cable this is designed for is linked below which runs about 8 bucks:</p><p><strong>MillSO 3.5mm Headphone Extension Cable</strong></p><p>https://www.amazon.com/MillSO-Headphone-Extension-Auxiliary-Headphones/dp/B07W7JQ673/</p><p>It was mounted with some #6 screws but I think #8 would work too. There are two versions of the "base", a plain one, and one with a headphone icon. I did not test the one with the headphone icon myself, but thanks again to <a href="https://www.printables.com/social/163978">Campo_da_Gator</a> for testing this out and confirming it also works well.</p><p>There is also a small cable management clip which can be mounted with some small screws.</p><p>If you print one, please post a make.</p><p>The STEP file is included for easy remixing.</p><p>To print the cable boot, I used PRILINE TPU which is a less flexible TPU (but works well for this).</p><p>https://www.amazon.com/PRILINE-TPU-1KG-Filament-Dimensional-Accuracy/dp/B074DV9JMX/</p><p>If you also need an underdesk USB Hub mount, check out my underdesk USB 3.0 hub mount with an audio jack here:</p><p>https://www.prusaprinters.org/prints/79596-under-desk-headphone-audio-jack-extender-and-anker</p><p>&nbsp;</p><h3>Print Settings</h3><p><strong>Printer Brand:</strong></p><p>Creality</p><p><strong>Printer:</strong></p><p>CR10S PRO</p><p><strong>Rafts:</strong></p><p>No</p><p><strong>Supports:</strong></p><p>Yes</p><p><strong>Resolution:</strong></p><p>0.2</p><p><strong>Infill:</strong></p><p>20</p><p><strong>Filament:</strong> ESUN PETG Black</p><p>Category: Office</p>