head(amame) Extras

prusaprinters

<p>I built the head(amame) headphones, but I wanted them hard wired. Here are the files for the strain relief, the wire clips for the headband, and printable bumpers.</p><p>The strain relief can be held in place by the existing XLR clip. Version 1 has a slit along the side to make inserting the wire easier (or for adding after building). Version 3 only has the slit part way so it looks cleaner when installed.</p><p>The bumpers take a m3 x 6-8mm screw from the opposite side of the headband holder, and then screw onto the threads.</p><p>There are 2 different styles of clips. The ones on the side are flat on the inside and the top ones have a bevel.</p><p>&nbsp;</p><p>The strain relief and bumpers should be printed in TPU with 2 perimeters and 10% infill.</p><p>The clips can be printed the same as all the other head(amame) parts.</p>